南山监控安装、

 南山 监控 安 装：186 8042 8088  


 欢迎 咨询 刘先生：159 1535 8518 


地球不爆炸，我就不放假 宇宙不重启，我就不休息


Title: How to enable Hik-Connect service in device Version: v1.0 Date: 1/3/2017
Product: Cameras, NVRs, DVRs Page: 1 of 5
Summary
Hik-Connect is a new service introduced by Hikvision which integrates the dynamic domain name
service along with alarm push notification service. It provides an easy way for devices to connect to the
Internet.
This manual is a guide for users to show them how to enable Hik-Connect service in device.
Discretion
User interface may not be identical to the instructions shown below depending on the product, firmware
version. However, the information and settings required to setup Hik-Connect services are similar across
all supporting products.
Preparation
Users need to upgrade device to proper firmware that supports Hik-Connect Service.
Title: How to enable Hik-Connect service in device Version: v1.0 Date: 1/3/2017
Product: Cameras, NVRs, DVRs Page: 2 of 5
How to enable Hik-Connect service in device
Hik-Connect function can be enabled via SADP tool, device local GUI (for DVRs/NVRs), device web
GUI, iVMS-4500 app and iVMS-4200 client software.
Note:
1) The Hik-Connect function is DISABLED by default in device.
2) For SADP, iVMS-4500 & iVMS-4200, please wait the new version which will be released to
support Hik-Connect later, we will update the contents in this document accordingly.
Method 1: Enable Hik-Connect via device web browser
Steps:
a. Login the device via web browser;
b. Go to Configuration > Network > Platform Access and enable Hik-Connect service by placing a
check in the Enable checkbox.
c. For the first time to use, users need to create a verification code.
i. Enter a new verification code and confirm;
ii. Read the terms of service;
iii. Click ‘OK’ to save the settings.
Title: How to enable Hik-Connect service in device Version: v1.0 Date: 1/3/2017
Product: Cameras, NVRs, DVRs Page: 3 of 5
d. Click ‘Save’ after all settings.
Note:
Users can check or modify the verification code in this page as well.
Method 2: Enable Hik-Connect via device local GUI (for DVRs/NVRs)
Steps:
a. Enter the device local GUI, go to Configuration>Network>Platform Access.
b. Enable the Hik-Connect service by placing a check in the Enable checkbox.
c. For the first time to use, users need to create a verification code.
i. Enter a new verification code;
ii. Read the terms of service and check the check box of terms of service;
iii. Click ‘OK’ to save the settings.